BON Recruitment Services
Agensi Pekerjaan Bon Sdn Bhd (JTR No. 1519)






 
   
     


[ Positions All ] [ Manufacturing/Construction/Engineering ] [ Accounts & Finance ]
[ HR/General Administration ] [ Sales & Marketing ] [ IT ] [ Others ]

 

Manufacturing/Construction

 

 

POSITION : Project Manager (SK)
COMPANY’S BUSINESS :

PLC Property Developer

PLACE OF WORK :

KL

  REQUIREMENT :

Diploma/Degree in Building, Civil Engineering, Architecture, Planning or Quantity Surveying (Knowledge in Conquas 21 & Qlassic an added advantage). Minimum 5 years experience in Property Development industry with at least 3 years in similar capacity. Has a strong knowledge on Construction management, contract administration and budgeting. Well versed in architecture, structural, mechanical & electrical works. Knowledge in engineering design detailing and able to make quick decision on contractual and site matters. Have good interpersonal, problem solving and communication skills. Self-motivated person and able to work independently. Able to liaise with clients, consultants, and authorities. Accountable to implement all policies, activities, procedures as relevant and required by this property development system; To fulfill the company’s contractual obligation to the purchasers; To plan, manage, monitor and control from pre-development stage to post-development stage to meet the approved quality, cost and time standards; To effectively liaise with authorities & contractors; To ensure in the implementation of ISO assessment system for all projects under all Region; To ensure in the implementation of Conquas 21 assessment system; To assist in liaison with government authorities & consultants; To monitor & ensure all complaint highlighted in the DNF are closed within the stipulated time frame; To manage & lead consultants, contractors & team of clerk of works; To report project progress status; To implement all policies, activities, procedures as relevant and required by the property development system; Any other duty & responsibility which the company may assign from time-to-time.

SALARY :

RM10000 /-

 

POSITION : PROJECT MANAGER (CL)
COMPANY’S BUSINESS :

High-end Property Developer

PLACE OF WORK :

AMPANG

  REQUIREMENT :

Possess Degree in Civil Engineering / Architectural / Building / Quantity Surveying or equivalent with minimum 5 – 7 years working experience in project management for high rise luxury condominium / serviced apartment projects. Able to coordinate effectively with consultants, contractors, suppliers and other relevant government authorities. With hands on knowledge on authority approval requirements. Able to ensure all technical requirements & specifications are complied with, timely completion of project and within approved budget. Able to work independently and lead the project team.

SALARY :

Negotiable

 

POSITION : PLANT/TECHNICAL MANAGER (JO)
COMPANY’S BUSINESS :

Ready Mixed Industry

PLACE OF WORK :

Johor Bahru

  REQUIREMENT :

Degree/Diploma in Engineering / Science or equivalent with minimum 2 years of working experience at a supervisory level, preferably in the ready mixed supply industry. To lead a team of Laboratory staff in the implementation and assessment for reporting, input and assessment of Quality Control information; Responsible for the accurate reporting and data input for Computerized Batching and Quality Control programmes; In preparation of Mix Designs and input to the production systems. Computer proficiency, familiar with Windows applications and computerized Batching and Quality Control Systems; Pleasant personality and self motivated in order to meet the demanding conditions of the building construction industry; Good command of both written and spoken in English and Bahasa Malaysia; Possess own transport and willing to move to other locations within Malaysia.

SALARY :

RM 4000 – RM 6000

 

POSITION : PLANT ENGINEER (SK)
COMPANY’S BUSINESS :

MNC F&B Manufacturer

PLACE OF WORK :

PJ

  REQUIREMENT :

Degree in engineering preferably Mechanical or Electronic Engineering. Minimum 3 years experience in a technical field, preferably in food manufacturing or consumer good industry. Computer Literate especially MS Office, MS Project, Basic AutoCAD or Visio; Consequence Driven Maintenance (CDM); and Assets & Maintenance Management (AMM). In-depth knowledge of food processing equipment maintenance & technology – applicable maintenance & technology & appropriate maintenance execution. Knowledge of food safety, regulatory requirements for food safety and hygienic engineering (OSH&R). Analytical skills in problem solving. Communication and service-minded. General understanding of financial analysis, budget reports and relevant business drivers. Responsible to ensure that the sites fixed assets are capable of performing & consistently fit for the purpose for which they were intended. The key being asset reliability & overall plant performance. Responsible to ensure that there exists within the Maintenance & Improvement (M&I) team an attitude of absolute intolerance for unsafe situations; Ensure that the technical integrity & availability of equipment complies with all regulations; Ensure that Good Engineering Practices are being applied at all times; Ensure the implementation of all repairs/modifications resulting from gap assessments, plant audits and notifications; Ensure that all mechanics & operators receive direct on the line coaching in machinery & line operation skills in respect to the requirements of Hygienic engineering.    

SALARY :

RM4000-5000

 

POSITION : DRAUGHTSMAN (Contract) x2 (JO)
COMPANY’S BUSINESS :

Project Sales & Services of  Elevators, Escalators

PLACE OF WORK :

BANGSAR

  REQUIREMENT :

Diploma / Technical qualifications in architecture, draughtsmanship or technical drawings with any relevant working experience. Proficient in AutoCAD and other related softwares. To check, review and approve shop drawings drawn by another draughtsman; To maintain a separate record of the latest drawings related to each contract; To ensure shop drawings are produced on time for submission to the factory and customers; To ensure all shop drawings are precise and accurate; To update and maintain record of the latest/current drawings by factories and other relevant Government Code Authorities; To provide support to the Engineering Department or other Internal Department with regards to technical and drawing requirement support; To ensure compliance to the ISO procedures. Applicants must be able to work under tight deadlines and pressures; Meticulous and attention to details.

SALARY :

RM 2000 – RM 2500 Package

 

POSITION : Service Technician (SL)
COMPANY’S BUSINESS :

Sales and Service

PLACE OF WORK :

SHAH ALAM, SELANGOR

  REQUIREMENT :

Certificate/Diploma in Electronic Engineering with minimum 2 years of working experiences in related field. Proficient in spoken and written English. Basic knowledge in computer hardware and software; Able to work independently, possess own transport and Malay male preferred. To perform trouble-shooting, maintenance and repair of the company’s barcode printers (on-site support).To conduct regular maintenance of the company’s barcode printers to reduce breakdown. To provide feedback on failure analysis. To make recommendations on product improvements

SALARY :

Negotiable 

 

POSITION : ELECTRICIAN (JY)
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

KARAK

  REQUIREMENT :

Possess Diploma or Certificate in Electrical & Electronics Engineering with minimum 2 years related working experience. Hardworking & able to work independently. Willing to work at Karak. Those with AO certificate are encouraged to apply.

SALARY :

Negotiable 

 

POSITION : WELDER (JY)  
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

KARAK

  REQUIREMENT :

Possess Diploma or Certificate in any relevant discipline with minimum 2 years welding experience. Hardworking & able to work independently. Willing to work at Karak.

SALARY :

Negotiable 

 

POSITION : CDM VALIDATOR (CL)
COMPANY’S BUSINESS :

MNC Engineering Firm

PLACE OF WORK :

Kuala Lumpur

  REQUIREMENT :

Degree holder with 3 years Validation and Verification of Clean Development Mechanism experience.  Exposed to wastewater treatment system background or palm oil mill industry's background, hydropower plant or any renewable energy related industrial background  preferred.  Must prepared to travel quite regularly.  Speaks and write good English. 

SALARY :

Negotiable 

 

POSITION : QC TECHNICIAN (JO)
COMPANY’S BUSINESS :

Ready Mixed Industry

PLACE OF WORK :

Based in Tampoi and Pasir Gudang

  REQUIREMENT :

SPM qualification or equivalent with preferably 1 – 2 years of working experience. Relevant experience in a ready-mixed industry in an added advantage.

SALARY :

RM 750++

 

POSITION : QA QC ENGINEER-JR/SR (JY)
COMPANY’S BUSINESS :

Construction & Engineering (Building)

PLACE OF WORK :

Hulu langat

  REQUIREMENT :

Possess Diploma or Degree in Civil engineering with at least 3 years experience in construction. Familiar with ISO standard. Speak & write good English & Bahasa Malaysia. With good personality, communication skill and ability to liaise with Clients. Able to monitor construction activities and coordinate works at site & able to coordinate with client, consultants and contractors. Computer literate in Microsoft Office application & willing to work at site.

SALARY :

RM2000-RM8000

 

POSITION : Project Engineer (JY)
COMPANY’S BUSINESS :

Steel Fabrication & Installation

PLACE OF WORK :

SHAH ALAM

  REQUIREMENT :

Possess Degree in Mechanical/chemical engineering with CGPA > 3.5, 2 years working experience in steel fabrication, piping works & mechanical works. Good communication & interpersonal skills. Computer literacy & good in English & Malay both oral & written communication skills. Knowledge & experience with regard to project management, including cost control, work planning & project scheduling. Fresh graduate is encouraged to apply. Responsible to assist project manager/senior project manager to implement specific projects assigned, to ensure that project is executed in a safety & timely manner, to ensure customer satisfaction at all time, to attend project progress meeting as required, able to planning, works arrangement, prepared project costing & others relevant projects report writing, prepare requisition for all the material purchase & to support other assigned activities when needed

SALARY :

RM3000-RM4500

 

POSITION : MATERIAL PLANNER (SK)
COMPANY’S BUSINESS :

MNC F&B Manufacturer

PLACE OF WORK :

PJ

  REQUIREMENT :

Degree in Engineering or equivalent with at least 5 years of working experience in related field. Preferably specializing in Manufacturing/Production Operations or equivalent. To perform the planning process, scheduling and monitoring production planning analysis, expediting incoming materials and inventory control; To prepare accurate & timely project includes progress, schedule achievement, cost performance, performance analysis, forecasting, item of concern and proposed corrective actions on a regular basis; Plan & update customer forecast for material planning; Monitor the production process planning and flow in order to meet the quality level and production output function; Maintains all manufacturing indices on productivity, quality and tale corrective actions for improvement; Preparation of production schedules and ensures production meets target output and quality; Responsible for monthly progress claims, variation orders, etc for approval by clients; Responsible for developing & controlling the master scheduling of monthly, weekly, and daily production and raw materials planning. This includes the capacity planning as well as monitoring the production, WIP to ensure ON-TIME delivery of products to customer cost effectively.

SALARY :

RM3500-4000

 

POSITION : TPM EXECUTIVE/ENGINEERING EXECUTIVE (SK)
COMPANY’S BUSINESS :

MNC F&B Manufacturer

PLACE OF WORK :

PJ

  REQUIREMENT :

Degree in Engineering or equivalent with at least 3 years of working experience in related field. Preferably experience in F&B food processing company. Experienced in managing preventive maintenance system or TPM would be an added advantage. Responsible to execute PM activities and lead MWG group. Support AWG in order to successful implementation of AM activities. Conduct training to ensure alignment to TPM best practices and ensure the sustainability of TPM in factory. Work independently. Excellent communication in English.

SALARY :

RM3500-4000

 

POSITION : PROJECT ENGINEER (SK)
COMPANY’S BUSINESS :

Manufacturer – concrete products & building materials

PLACE OF WORK :

PONTIAN, JB

  REQUIREMENT :

Degree in Civil/Structural Engineering with at least 3 years of working experience in related field. Preferably with experience in Precast Concrete Products.

SALARY :

RM3000-4000

 

POSITION : Mechanical ENGINEERS (JY)
COMPANY’S BUSINESS :

Engineering & construction

PLACE OF WORK :

Bukit Raja, Selangor

  REQUIREMENT :

Possess Diploma or Degree in Mechanical Engineering with at least 2 years experience in piping & steel fabrication in construction industry related to Petro-Chemical, Chemical or refinery. Interpretation of layout & isometric drawings is a pre requisite. Knowledge of AutoCAD is an added advantage.

SALARY :

RM2000-RM3000

 

POSITION : M&E SUPERVISOR/M&E Engineer (JY)
COMPANY’S BUSINESS :

Construction & Engineering (Building)

PLACE OF WORK :

Hulu langat

  REQUIREMENT :

Possess Degree/Diploma in Mechanical and Electrical Engineering with minimum 2 years' working experience in the M&E services at construction site. Computer literate in Microsoft Office application & possess own transport.

SALARY :

RM2000-RM3000

 

POSITION : PRODUCTION COORDINATOR (SK)
COMPANY’S BUSINESS :

Manufacturer – Rubber Compounding & Rubber Automobile Parts

PLACE OF WORK :

SEC U5, SHAH ALAM

  REQUIREMENT :

Diploma holder with at least 1 year of experience in Manufacturing sector. Responsible in Quality Inspection; Coordinate with Production & Customer Service. Responsible to follow up closely with the production progress & solve problems of quality control nature. Able to work independently and with minimum supervision. Able to work for long hours, if required. Honest, polite & friendly hardworking and good communication skill. Immediately availability preferred.

SALARY :

RM2000 +/-      

 

POSITION : TECHNICAL/draughtsman (SK) 
COMPANY’S BUSINESS :

Manufacturer – concrete products & building materials

PLACE OF WORK :

PONTIAN, JB

  REQUIREMENT :

Technical Certificate in Building Drafting (Civil/Structural) with minimum 1 year of relevant experience. Responsible to handle the daily production/delivery checklists/production planning, scheduling and quality control of precast concrete and RC piles components; To be responsible for updating the internal production/delivery stock, and etc; To produce drawing using AutoCAD. Fresh graduates are encouraged to apply.

SALARY :

RM1200 +/-

 

POSITION : PROJECT PLANNER – Construction/Railway System (CL)
COMPANY’S BUSINESS : ELECTRICAL SYSTEMS ENGINEERING COMPANY
PLACE OF WORK :

Kuala Lumpur

  REQUIREMENT :

Degree holder with 3-5 years planning & Scheduling experience in the Construction/Railway System or related Engineering field preferred. Hands-on Primavera is a must. Able to speak and write good English. Exposed to MNC company before is an added advantage.

SALARY :

Negotiable 

 

POSITION : CONTRACT MANAGER (JY)
COMPANY’S BUSINESS :

Japanese based construction & engineering (Building)

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Degree/Diploma in Civil & Structure Engineering/ Building Technology / Quantity Surveying or equivalent with minimum 5-10 years of working experience in related experience. Familiar with Contracts Administration for constructions projects. Good in negotiation, communication, interpersonal & leadership skill.
SALARY :

RM 6000-8000

 

POSITION : PROJECT MANAGER (JY)
COMPANY’S BUSINESS :

Supply, Install & Service of Elevators & Escalators

PLACE OF WORK :

KUALA LUMPUR

  REQUIREMENT :

Possess Degree/Diploma Holder in Engineering with minimum 10 years experience in Lift Industry or construction related industry. With good project management skills & able to lead a team of engineers and supervisors. With good interpersonal, leadership and communication skills. Able to speak good English & Bahasa Malaysia.

SALARY :

Negotiable

 

POSITION : PROJECT MANAGER/ASSISTANT PROJECT MANAGER/SENIOR PROJECT ENGINEER (JY) Johor
COMPANY’S BUSINESS :

Supply, Install & Service of Elevators & Escalators

PLACE OF WORK :

Johor Bahru  

  REQUIREMENT :

Possess Degree/Diploma Holder in Engineering with minimum 5 years experience in Lift Industry or construction related industry. With good project management skills & able to lead a team of engineers and supervisors. With good interpersonal, leadership and communication skills. Able to speak good English & Bahasa Malaysia.

SALARY :

Negotiable

 

POSITION : DEPUTY FACTORY MANAGER (JY) Johor
  COMPANY’S BUSINESS :

Manufacturing & Trading of Building Materials

  PLACE OF WORK :

Pasir Gudang

  REQUIREMENT :

Possess Degree in Mechanical or Electrical Engineering with at least 5 years working experience in manufacturing or factory environment, preferably in ceramic/tiles industry. With experience in managing and leading a team of staff. With hand on experience in ISO Standards, Costing, Quality Management System. Computer literate – especially in Microsoft Excel System. Possess excellent interpersonal skills, leadership qualities and integrity. Able to communicate effectively, both verbally and written, in English and Bahasa Malaysia, ability to speak Chinese is an added advantage.

  SALARY :

Negotiable

 

POSITION : PROJECT ENGINEER/ PROJECT SUPERVISOR (JY)
COMPANY’S BUSINESS :

Supply, Install & Service of Elevators & Escalators

PLACE OF WORK :

KUALA LUMPUR

  REQUIREMENT :

Possess Degree/Diploma Holder in Engineering with minimum 2 years experience in construction related project management work. With good knowledge of project implementation work. With ability to liaise with architects/consultants/client & sub-contractors on all design finalization. Able to work independently and ensure all projects under his/her care are attended to efficiently. With good interpersonal, leadership and communication skills. Able to speak good English & Bahasa Malaysia.

SALARY :

Negotiable

 

POSITION : SALES SUPPORT ENGINEER (JY)
COMPANY’S BUSINESS : MNC based environmental equipment and engineering
PLACE OF WORK :

JALAN TANDANG, Petaling Jaya

  REQUIREMENT :

Possess Degree in chemical engineering, mechanical and or environmental engineering with at least 2 years of related work experience. Self motivated and results-driven and strong drive to achieve sales target. With relevant practical knowledge. Good technical understanding of clients’ requirement. Excellent command of English both written and spoken. Highly responsible and able to work under pressure.

SALARY :

RM2000-RM3500

 

POSITION : Production Engineer (JY)
  COMPANY’S BUSINESS :

Electronic waste & scrap recycling

  PLACE OF WORK :

SHAH ALAM

  REQUIREMENT :

Possess Diploma in Mechanical Engineering / Mechatronic Engineering with 2 years related working experience. With knowledge in related engineering drawing program or AutoCad is a must. Possess good interpersonal skills and able to work with minimum supervision. Able to speak fluent English & Bahasa Malaysia, those with ability to speak some Chinese dialect is an added advantage. With ability to supervise workers.

  SALARY :

RM 2500-3500

 

POSITION : JR QUANTITY SURVEYOR/ (CONTRACT ADMINISTRATOR)  (SK)
  COMPANY’S BUSINESS :

Engineering, Sales & Service – Elevators, escalators

  PLACE OF WORK :

DAMANSARA HEIGHTS

  REQUIREMENT :

Diploma/Degree in Building, Quantity Survey or equivalent; Excellent interpersonal & communication skills. Comfortable working with project engineers and external clients. Required a good understanding of contract requirements. High level of integrity. Able to work under pressure and tight deadline. At least 2-3 years experience but fresh graduates are encouraged to apply. Good analytical, planning and organization skill. Prepare generate and process progress claims on timely basis; Work with project personnel on work done feedback and maximization of certification received; Prompt follow-up on claims and collections on certified amount; Negotiate with external clients on shortfall in certifications, temporary usage agreements, pricing of variation and final accounts with the supervision of immediate superior; Perform customer collection calls, send reminder letters to customer with overdue accounts to facilitate timely payments and assist the customer in resolving all disputes; Report on collection status and outstanding accounts to immediate superior; Perform all relevant and related administrative work. 

  SALARY :

RM 2200

 

POSITION : DRAUGHTSMAN (JY)
  COMPANY’S BUSINESS :

Construction & Engineering

  PLACE OF WORK :

KARAK

  REQUIREMENT :

Possess Diploma / Certificate in Engineering and/or Autocad with minimum 3 years of working experience in AUTOCAD drafting and technical document control. With knowledge of operating Autocad Version R2000 and above

  SALARY :

RM 2000+-

 

POSITION : PRODUCTION & MATERIAL PLANNER (JY) Johor
  COMPANY’S BUSINESS :

Manufacturing & Trading of Building Materials

  PLACE OF WORK :

Pasir Gudang

  REQUIREMENT :

Possess at least a Diploma; Advanced/Higher/Graduate Diploma Degree in related field with at least 1 year working experience in the related field is required for this position. Preferably specializing in Manufacturing/Production Operations or equivalent. High integrity, committed, self motivated and can work under minimum supervision & able to work independently

  SALARY :

Negotiable

 

POSITION : PRODUCTION ENGINEER (JY) Johor
  COMPANY’S BUSINESS :

Manufacturing & Trading of Building Materials

  PLACE OF WORK :

Pasir Gudang

  REQUIREMENT :

Possess Diploma or Degree in Mechanical Engineering or related discipline. Fresh graduates are encouraged to apply. Good analytical skills, independent, dynamic, result oriented and hands-on skill preferred. With good interpersonal and communication skill

  SALARY :

RM1400 - RM1800

 

POSITION : R&D TECHNICIAN (JY)  (JY) Johor
  COMPANY’S BUSINESS :

Manufacturing & Trading of Building Materials

  PLACE OF WORK :

Pasir Gudang

  REQUIREMENT :

Possess SPM or United Examination Certificate with related experience is an added advantage. Willing to work in dusty & noisy environment. Proficient in both written & spoken English & Bahasa Malaysia, those can read & write in Chinese is an added advantage. With good communication & good interpersonal skills. Willing to travel often.

  SALARY :

Negotiable

 

POSITION : SENIOR STRUCTURAL DESIGN MANAGER (STEEL) HOD (JY)
COMPANY’S BUSINESS : Manufacturing of pressed steel water tanks and window louvres
PLACE OF WORK :

KUALA LUMPUR

  REQUIREMENT :

Recognized degree in Civil or Structural Engineering with minimum 10 years experience in structural designs and detailing, preferably designs and detailing of lattice steel structures with at least 5 years at managerial capacity. Familiarity in design software such as MS Tower, Staad Pro and PLS Tower and detailing software such as BOCAD and AUTOCAD, etc will be an added advantage. Ability to work under constant pressure and to work around challenges to meet targets. Posses good English, Malay and Chinese preferred. Good interpersonal and communication skills.  Result-oriented and performance-driven.

SALARY :

RM15000 + Allowance   

 

POSITION : SENIOR BUYER - Construction (CL) (12 Months Contract or More)
COMPANY’S BUSINESS :

ELECTRICAL SYSTEMS ENGINEERING COMPANY

PLACE OF WORK :

AMPANG

  REQUIREMENT :

Highly independent and a self starterVery knowledgeable in construction material procurement – railway related an advantageTeam player with strong organizing and planning capabilitiesCurrent knowledge of shipping.  Understanding the tender, scope and populating the procurement plan.  Understanding and expanding on site requisitions for tools and materials.  Identifying suitable vendors for supply of tools and materials.  Preparation of enquiries to vendors.  Feedback and monitoring of supplier performance.  Maintenance of vendor/supplier evaluation database.  Planning of procurement of permanent works materials in line with the construction teams requirements.  Arranging logistic/machinery requirements for construction team.  Liasing with agents/shippers and consortium members on all offshore shipment including documentation, clearance and logistic arrangements and reporting.

SALARY : Negotiable

 

POSITION : FIRST LINE MANAGER (SK)
COMPANY’S BUSINESS :

MNC F&B Manufacturer

PLACE OF WORK :

PJ

  REQUIREMENT :

Deg in Engineering/Chemistry/Food Technology/Mathematics or related discipline, min 3 yrs exp in the manufacturing industry, good leadership & people management skills, requires to work on a shift / day basis, must have in-depth technical knowledge (i.e. Process & Product Mastery), able to lead, manage and coach a team in the execution of all manufacturing activities that are required for the conversion of raw materials to finished goods, trouble-shoot and resolve manufacturing / line-engineering deviations, deliver agreed targets on Quality, Supply Plan, Cost Management, propose and implement ideas for continuous improvement, good command in English with good communication skills.

SALARY :

RM4000-5000          Remark: this position requires to undergo around 12 month Diploma program (fully sponsor by the company) & must pass this program, if fail the company will end this contract accordingly.

 

POSITION : PRODUCTION/OPERATION MANAGER (SK) - Jakarta
COMPANY’S BUSINESS :

MNC Trading & Manufacturing Company – Wood Process/Biomass

PLACE OF WORK :

JAKARTA – CURUG  

  REQUIREMENT :

Diploma/Degree in Mechanical, Electronics, Mechatronics, Engineering, Manufacturing Management or equivalent qualification with at least 5 years of working experience in Plant & Machinery maintenance. Minimum 5 years of experience in the overall management of a manufacturing facility in the Manufacturing, Production development, Production systems improvement engineering, Maintenance, Quality control, Customer service, and etc. Preferably from wood process industries and/or biomass industry. Knowledge in machine design/tooling improvement/breakdown improvement. Good planning, analytical and problem solving. Able to plan, organize and to ensure smooth flow in its production line and schedule of delivery; Experience and ability to lead and train his people to next level of success; Must have the ability to inspire his team to strive for excellence; Self dependent with high drive to learn and explore new initiatives; Good people and leadership skill with the ability to build and promote team spirits; Good communication skill as well as “team player” within the management team; Able to travel and be stationed at the countries where our group has significant operations; Must be willing to travel; Flexible and adaptable in a fast and changing working environment. Able to work within tight datelines.

SALARY :

Negotiable         

 

POSITION : INDUSTRIAL PERFORMANCE EXECUTIVE (SK)
COMPANY’S BUSINESS :

MNC F&B Manufacturer

PLACE OF WORK :

PJ

  REQUIREMENT :

Degree in Industrial Engineering/Food Science & Technology/Production Engineering/Process Engineering with at least 2 years of experience in manufacturing & production operation. Certified as Green Belt in 6 Sigma; Experience in implementing TPM. Familiar with continuous improvement tools & concepts (5S, Lean Manufacturing, 6 Sigma, and etc). Demonstrated ability in driving successful performance improvements & cost reduction projects. Support the factories in order to ensure the effective use of appropriate improvement tools & methods; Provide trainings & coaching on focused improvement methodologies in supporting factory teams to achieve the target savings; Conduct & participate in focused projects; Coordinate & drive factory initiatives; Develop, implement & maintain sustainable performance improvements, cost reduction and competitiveness; Ensuring & optimizing the use of resources through the identification & elimination of losses; Leadership of the Focused Improvement Pillar to drive the implementation of the Focused Improvement Pillar of TPM methodology at the factory; and Achieve the annual cost savings target as defined. 

SALARY :

RM3500-4000    

 

POSITION : SUPERVISOR / EXECUTIVE SPARE PARTS (JY)
COMPANY’S BUSINESS :

Manufacturing

PLACE OF WORK :

SECTION U1, SHAH ALAM

  REQUIREMENT :

Possess Certificate/ Diploma in related discipline with 2 years working experience. Result oriented, high integrity and good working attitude. Able to speak fluent English & Bahasa Malaysia, those with ability to speak some Chinese dialect is an added advantage.

SALARY : RM 1500-1800

 

POSITION : TECHNICIAN (JY)
COMPANY’S BUSINESS :

Japanese Automotive Company

PLACE OF WORK :

SHAH ALAM

  REQUIREMENT :

Professional Certificate/ Diploma/ Advanced Diploma in Mechanical Engineering. Minimum 2 years working experience with good attitude. Must be independent, hardworking, team player and willing to work long hour. Proficient in computer application. Proficient in Mandarin, English &Bahasa Melayu. Plan and coordinate field action activities prior to dealers development & operation. Provide consultancy on the troubleshooting and repair of motorcycle to service dealer. Manage and resolve technical request by service dealers. Collect technical data, conduct analysis and report. Conduct on job training and technical training.

SALARY : RM1300-RM1500

 

POSITION : SITE CONTRACTS MANAGER/SR QS (CL)
COMPANY’S BUSINESS : ELECTRICAL SYSTEMS ENGINEERING COMPANY
PLACE OF WORK :

BUKIT MERTAJAM

  REQUIREMENT :

Possess Degree in Quantity Surveyor or related field with minimum 5 year similar working experience in the Railway Systems Industries.  Responsible for all relevant and associated processes and procedures pertaining to Contract management and administration as required on site:  Identifying variances and opportunities established on site and developing these through to conclusion; Maintaining protection against all relevant liabilities on site and developing these through to conclusion; Preparation of interim applications for payment; Relevant commercial management of subcontractors and suppliers; Site office administration; Assist with relevant procurement and logistical matters; Supervision and assignment of work to subordinates.  Good exposure with OSH and Procurement & Logistics will be an added advantage.

SALARY : Negotiable

 

POSITION : MECHANICAL ENGINEERS (JY)
COMPANY’S BUSINESS : MNC - complex mechanical machinery assembling
PLACE OF WORK :

SHAH ALAM

  REQUIREMENT :

Possess Diploma or Degree in mechanical engineering with excellent results. With at least 5 years experience in complex mechanical machinery assembling, at least 3 years experience in order processing mechanical machinery & at least 3 years experience in SAP R3 / R4.6. Able to read and put into practice complex mechanical construction drawings & understand complicated mechanical context. Computer literate in MS-Windows, SAP R3 / R4.6. Speak & write good English, those can understand German is an added advantage. Willing to learn new technologies, self starter, with excellent communication skills and team player.

SALARY : Negotiable

 

POSITION : Quantity Surveyor (JY)
COMPANY’S BUSINESS : Piling System
PLACE OF WORK :

PETALING JAYA

  REQUIREMENT :

Possess at least Diploma in Quantity with working experience would be added an advantage but not a must. Fresh Graduate is encouraged to apply. Computer literate & possess good interpersonal skill. Able to speak good English & Bahasa Malaysia, those with ability to speak some Chinese dialect is an added advantage.

SALARY : Negotiable

 

POSITION : TECHNICAL SUPPORT ENGINEER (JY)
COMPANY’S BUSINESS :

MNC based development of communication solutions.

PLACE OF WORK :

Petaling Jaya.

  REQUIREMENT : Possess Degree in Electronics/Electrical Engineering or relevant engineering fields with 3 to 5 years working experience in Industrial Automation. Candidates with PLC programming (Rockwell Automation-Allen Bradley, Siemens PLC, Schneider Electric-Quantum) experience, Wireless Communication experience & knowledge of communication protocols (such as Modbus, Profibus DP, Wireless and other 3rd party protocols) are an added advantage. Excellent command of written and spoken English & strong computing skills documentation in CRM package, Microsoft Word, Excel and PowerPoint.  Strong problem solving skills with ability to manage multiple tasks independently, adapting to shifting priorities.  Resourceful, result orientated, team player, self motivated and performance driven. Willing to travel within sea region.
SALARY :

RM4000-5000  

 

POSITION : PRODUCT TECHNOLOGIST (SK)
COMPANY’S BUSINESS : MNC F&B Manufacturer
PLACE OF WORK :

PJ

  REQUIREMENT : Degree of Food Science, Chemistry, Biochemistry or equivalent qualification with at least 3 years of relevant working experience is required for this position. Applicants with experience in Food manufacturing or R&D will be an added advantage. Able to take initiative and work in a dynamic team environment. Computer Literate (MS Word, Excel, Power Point, SAP and etc. Responsible in achieving & maintaining high technical standards in new products & process development and renovation of products & process in portfolio. Efficient implementation of new products & process development activities. Continuously improve products & process and develop technical competencies to achieve a best-in class level of new products & process development knowledge, skills, and performance and etc.
SALARY : RM4000 +/-

 

POSITION : MECHANICAL SERVICES ENGINEER (JY)
COMPANY’S BUSINESS : M&E consultancy
PLACE OF WORK :

Ampang, KL

  REQUIREMENT : Degree in mechanical Engineering in local/overseas University or equivalent with minimum 3-5 years of hands on experience in building M&E services. Able to design mechanical services related to building M&E services. Skilled in AutoCAD & ACMV Services.
SALARY : Negotiable

 

POSITION : ESTIMATOR, Civil (JY)
COMPANY’S BUSINESS : Service Provider of construction work.
PLACE OF WORK :

SECTION 32, SHAH ALAM

  REQUIREMENT : Possess Diploma or Degree in Civil engineering with at least 3-5 years experience principally in the oil & gas construction industry.  With ability to do material take off from engineering drawings, price estimation for sender purposes, site measurement compilation and upgrading of until rates and tender proposal preparation. Able to speak good English & Bahasa Malaysia, those can communicate in some Chinese dialects is an added advantage.
SALARY :

RM3000 and above (depending on experience)

 

POSITION : Laboratory CHEMIST (SK)
COMPANY’S BUSINESS : PLC Manufacturing Company
PLACE OF WORK :

SEMENYIH

  REQUIREMENT : Degree/Professional Degree in Chemistry/Material Science/Engineering – Chemical with at least 2-3 years of working experience in the laboratory environment. Required candidate with relevant experience in metallurgical laboratory, process development and chemical analysis. Responsible to manage and fully conduct all chemical testing in the laboratory relating to research & development.
SALARY :

RM2500-3500   

 

POSITION : SITE ENGINEER (JY)
COMPANY’S BUSINESS : Piling System
PLACE OF WORK :

PETALING JAYA

  REQUIREMENT : Possess degree in Civil Engineering with 1year of working experience or Diploma with Min 3 years of working experience. Strong analytical skills to detect, trouble shoot and problem solving. Possess technical knowledge in foundation engineering. Good written and oral communication skills.
SALARY : Neg (RM2500-RM3000+) + OT + Transport Allow RM200 + Handphone Allow RM100

 

POSITION : PRODUCTION PLANNING EXECUTIVE (SK)
COMPANY’S BUSINESS : Manufacturer – Precision Metal Stamping (Japanese Company)
PLACE OF WORK :

SHAH ALAM

  REQUIREMENT : Diploma/Degree in Engineering or equivalent with at least 1 year of working experience in related field. Preferably specializing in Manufacturing/Production Operations or equivalent. Able to plan and coordinate production schedule; commit schedule & monitor daily output in order to meet the schedule & achieve plan; possess goods planning skill and able to interact well with staffs. Able to work independently and strong leadership.
SALARY : RM2000-3000

 

POSITION : PRODUCTION SUPERVISOR (CL)
COMPANY’S BUSINESS :

Local Based Metal Stamping Electronic Parts

PLACE OF WORK :

Batu Tiga, Shah Alam

  REQUIREMENT : Mimimum Certificate/ Diploma in Mechanical/ Electrical & Electronic Engineering or any related discipline. At least 2-3 years of working experience in Production environment. Possess own transport. Willing to work on shift. Willing to work overtime. Possess leadership skills.
SALARY :

RM 2,000 – RM 2,500

 

POSITION : PROJECT SUPERVISOR (JY)
COMPANY’S BUSINESS : MNC Corporate Design / Renovation / Office Furniture Supply
PLACE OF WORK :

KL – Jln Raja Chulan

  REQUIREMENT :

Dip in Engineering / Interior Design / Business Studies or any related field, 1-2 year of working experience, computer literate, posses own transport & willing to travel, responsible for initiating project planning, implementing according to project management methodologies, gearing the project team towards achieving project goals within specified / tight deadlines, identify, diagnose and resolve project related issues, conduct analysis and measurement of project plans, initiative, responsible, helping, co-operation, self-motivated & discipline, possess strong work ethic and be upbeat, positive and flexible individual, proficient in English, B. Melayu & Chinese, fresh graduates are also encouraged to apply.

SALARY :

RM 1800-2300 + Fixed Transport Allow. RM 500 + H/P Claims RM 300 + Free Parking + Outstation Claims (if any)

 

POSITION : CONSTRUCTION MANAGER (JY)
COMPANY’S BUSINESS :

Japanese based construction & engineering (Building)

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Degree/Diploma in Civil & Structure Engineering/ Building Technology / Quantity Surveying or equivalent with minimum 5-10 years of working experience in construction management experience. Able to lead project site teams for various works. Good personality, communication skill and ability to liaise with Clients, Authorities and relevant parties. Good written and verbal communication skills.
SALARY :

RM 6000-8000

 

POSITION : PLANNING MANAGER (JY)
COMPANY’S BUSINESS :

Japanese based construction & engineering (Building)

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Degree/Diploma in Civil & Structure Engineering/ Building Technology / Quantity Surveying or equivalent with minimum 5-10 years of working experience in related experience. Meticulous, analytical and assertive. Good personality, negotiation, communication skill. Good written and verbal communication skills. Computer literate (good knowledge of MS Office - Excel, Word, Power Point etc.). Able to work with minimum supervision on own or as part of a team.
SALARY :

RM 6000-8000

 

POSITION : SENIOR MECHANICAL ENGINEER (JY)
COMPANY’S BUSINESS :

Australian based general engineering consultancy firm

PLACE OF WORK :

JALAN IMBI, KL

  REQUIREMENT : Possess Degree in Mechanical Engineering in local/overseas University or equivalent. With minimum 5 years of hands on experience in design, documentation and supervision of large projects including hotels, office and commercial building hospitals, apartments and institution buildings with a Consulting Engineering firm is a pre-requisite. Good spoken and written in English language.
SALARY :

Negotiable

 

POSITION : PLANNING EXECUTIVES x2 (JY)
COMPANY’S BUSINESS :

Manufacturer of health food supplement, pharmaceutical, skin care & personal care products

PLACE OF WORK :

SHAH ALAM

  REQUIREMENT : Possess Diploma or Degree in any discipline with experience in related industry. With detailed personality, computer literacy and able to work under minimum supervision. Possess good planning and analytical skills. Posses own transport.
SALARY :

RM2000 & above

 

POSITION : MANUFACTURING/TECHNICAL ENGINEER (JY)
COMPANY’S BUSINESS :

Manufacturer of health food supplement, pharmaceutical, skin care & personal care products

PLACE OF WORK :

SHAH ALAM

  REQUIREMENT : Possess Diploma or Degree in Material Science Engineering, Mechanical Engineering or equivalent with 2 years of working experience in the related field. Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Posses own transport.
SALARY :

RM2000+-

 

POSITION : QUANTITY SURVEYOR (JY)
COMPANY’S BUSINESS :

MNC Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Degree/Diploma in quantity survey with minimum 1 year’s related working experience. Computer literate in Microsoft Office application. Detailed and able to work independently. With good communication skills, those can speak some Chinese dialect is an added advantage.
SALARY :

RM 2,500+-

 

POSITION : SR TECHNICIAN – CNC (SK)
COMPANY’S BUSINESS :

PLC Manufacturing Company

PLACE OF WORK :

SEMENYIH

  REQUIREMENT : At least SPM with minimum 5 years of working experience in handling general machinery processing (EDM, Wire Cut, Milling CNC, Lathe Machine & Grinding). Capable in mould repairing. Able to read & draw mechanical technical drawing.
SALARY :

RM1800-2500

 

POSITION : AUTOCAD DRAUGHTSMAN (JY)
COMPANY’S BUSINESS :

Lighting & Electrical Accessories Manufacturing

PLACE OF WORK :

Subang Jaya

  REQUIREMENT : Diploma in Mechanical Engineering. With good attitude & willing to learn. Training will be provided. Fresh graduate are encouraged to apply.
SALARY :

RM1400-RM1800

 

POSITION : RESEARCH & DEVELOPMENT ENGINEER (SK)
COMPANY’S BUSINESS :

Supplier – quality equipment, materials and tools 

PLACE OF WORK :

KOTA KEMUNING, SHAH ALAM

  REQUIREMENT : Diploma/Degree in Mechatronics/E&E Engineering with at least 5 years of experience in manufacturing/engineering environment. Good knowledge in the design & development of industrial machinery & automation. Good communication skills. Innovative and keen in design & development of new machinery. Responsible to provide new improvements to existing machinery; Decide on designs & systems for new tyre retreading equipment; Manage & update all documentations; Plan, manage product development schedules; and Coordinate with production, sales vendors, outside agents & etc. 
SALARY :

RM 2500-4000

 

POSITION : SAFETY OFFICER - Building (JY)
COMPANY’S BUSINESS :

MNC Construction and Engineering (Building)

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Diploma/ Certificate in Safety and Health Competency Course approved by DOSH with minimum 3 years experience in construction safety supervision and implementation. Registered OSH Officer under DOSH is a pre-requisite
SALARY :

RM 2500-RM5000

 

POSITION : CONTRACTS EXECUTIVE (JY)
  COMPANY’S BUSINESS :

Construction & Engineering (Building)

  PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Degree in Mechanical and/or Electrical Engineering with minimum 1 year’s working experience in estimation of M&E works. Computer literate in Microsoft Office application. Fresh graduates are encouraged to apply.
  SALARY :

RM2000-RM3000

 

POSITION : Project Manager / Assistant Project Manager (JY)  
  COMPANY’S BUSINESS :

Piling System

  PLACE OF WORK : PETALING JAYA
  REQUIREMENT : Possess degree in Civil Engineering with at least 5 years of working experience. With experience in piling work will be an advantage. Possess good leadership, project management and organization skills. Strong analytical skills to detect, trouble shoot and problem solving. Mature and independent.
  SALARY :

Negotiable

 

POSITION : SERVICE ENGINEER/SR (JY)    
  COMPANY’S BUSINESS :

Sales & Service of Compressors, Steam turbines and Gas turbines

  PLACE OF WORK : Kuala Lumpur
  REQUIREMENT : Possess Degree or Post Graduate Diploma in Mechanical and Electrical Engineering or Petroleum or Oil & Gas Engineering. With at least 3-5 years proven experience in oil & gas or power plant industry, in operating or serving Compressors, Steam turbines or Gas turbines. Able to speak fluent English. Willing to travel throughout the region.
  SALARY :

RM4000-RM5000

 

POSITION : TECHNICAL SERVICE ENGINEER (JY)
  COMPANY’S BUSINESS :

Building Materials

  PLACE OF WORK : SUBANG JAYA
  REQUIREMENT : Possess Degree in Civil / Structural Engineering with 1 to 2 years working experience. Fresh graduates are encouraged to apply. Knowledge in Autocad and Design software. Possess problem solving, analytical and strong communication skills. Highly motivated possess initiative, result oriented and a self-starter. Able to work under time constrains and hard working     
  SALARY :

Negotiable

 

POSITION : QC &QA EXECUTIVE (SK)
  COMPANY’S BUSINESS :

Manufacturer – AirCond Equipment & Parts

  PLACE OF WORK : Shah alam 
  REQUIREMENT : Diploma/Degree holder with at least 2 years of relevant of working experience in manufacturing environment.  Responsible for the direct& day-to-day QA/QC in process and outgoing activities. Supervise the workers to carry out their task effectively. Hold quality meeting concern members & reporting to the management. Ensure proper maintenance & updating of quality records. Resolve quality discrepancies & participate in quality improvement activities. Implement incoming quality control, in process quality control, final quality assurance, prevention measures.
  SALARY :

Negotiable

 

POSITION : PRODUCTION PLANNING EXECUTIVE (SK)
  COMPANY’S BUSINESS :

Manufacturer – AirCond Equipment & Parts

  PLACE OF WORK : Shah alam 
  REQUIREMENT : Diploma/Degree holder with at least 2 years of relevant working experience. Responsible to plan & coordinate production schedule. Ensure all manufacturing planning & scheduling activities are carried out efficiency to meet all customers’ deliveries on time. Commit schedule & monitor daily output in order to meet the schedule & achieve plan. Responsible for raw materials, ordering and etc. Possess good planning skill and able to interact well with all levels. Ability to work independently and strong leadership. 
  SALARY :

Negotiable

 

POSITION : PROJECT MANAGER (JY) - Plant Construction    
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Degree in Civil and/or Structural Engineering with minimum 10 years' working experience in the construction/project management field. Able to lead and supervise site personnel and coordinate with consultants and sub-contractors. Computer literate in Microsoft Office application.
SALARY :

RM7000- 9000

 

POSITION : ASSISTANT PROJECT MANAGER (JY)     
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Degree in Civil and/or Structural Engineering with minimum 7 years' working experience in the construction/project management field. Able to lead and supervise site personnel and coordinate with consultants and sub-contractors. Computer literate in Microsoft Office application.
SALARY :

RM 6000 +-

 

POSITION : MAINTENANCE & FACILITIES MANAGER (SK)      
COMPANY’S BUSINESS :

Manufacturer – Polymer, Plastic, Rubber

PLACE OF WORK :

Sg. buloh

  REQUIREMENT : Degree in Mechanical/Electrical/Electronics Engineering. Specialist in Electrical or Hydraulic or both. At least 3 years of experience in polymer/plastic/rubber industries and good knowledge and hand on in pneumatic, hydraulic, mechanical and electronics machinery maintenance are essential. To plan and keep all equipments in the factory is good conditions & propose improvement if necessary. Good leadership, PR, Communication and Reporting skills, literate in PC is essential. Highly positive and self motivated and result oriented, corporate goals objective driven personality.
SALARY :

RM 3500-6000

 

POSITION : SAFETY OFFICER (JY)
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Diploma/ Certificate in Safety and Health Competency Course approved by DOSH with minimum 3 years experience in construction safety supervision and implementation. Registered OSH Officer under DOSH is a pre-requisite.
SALARY : RM 2000-RM5000

 

 

 

POSITION : C&S DESIGN ENGINEER (JY)    
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Degree in Civil and/or Structural Engineering with advanced C&S design knowledge knowledge and skills with at least 3 year working experience in C&S design & coordination works in construction industry. With knowledge in operating AutoCAD, Engineering software such AS Prokon, Staad Pro, etc…
SALARY :

RM 3000 and above

 

 

 

POSITION : QC EXECUTIVE (SK)     
COMPANY’S BUSINESS :

Manufacturer – Polymer, Plastic, Rubber

PLACE OF WORK :

Sg. buloh

  REQUIREMENT : Degree in Engineering/Science with at least 2 years manufacturing experience in QA/QC and preferably in polymer/plastic/rubber industries. Knowledge of ISO 9001.
SALARY :

RM 2200-3000

 

POSITION : CAD OPERATOR (JY)
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

REQUIREMENT : Diploma in any industry with at least 2 years experience in drawing condominium, able to work independently.
SALARY : RM2500+-

 

 

 

POSITION : PRODUCTION EXECUTIVE (SK)   
COMPANY’S BUSINESS :

Manufacturer – Polymer, Plastic, Rubber

PLACE OF WORK :

Sg. buloh

  REQUIREMENT : Diploma/Degree in Electronics & Electrical/Mechanical/Chemistry with at least 2 years similar working experience and preferably in polymer/plastic/rubber industries.
SALARY :

RM 1500-2500

 

POSITION : M&E SUPERVISOR (JY)
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Diploma / Certificate in Mechanical and/or Electrical Engineering with minimum 2 years' working experience in the M&E services at construction site. Computer literate in Microsoft Office application.
SALARY :

RM 1800 and above

 

POSITION : Building SUPERVISOR (JY)
COMPANY’S BUSINESS :

Construction & Engineering

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Possess Diploma / Certificate in Civil and/or Structural Engineering with minimum 2 years' working experience in the construction/project management field. Computer literate in Microsoft Office application.
SALARY :

RM 1800 and above

 

  POSITION : ENGINEER (JY)
  COMPANY’S BUSINESS :

Consultancy  company for energy conservation system

  PLACE OF WORK : KUALA LUMPUR
  REQUIREMENT : Diploma in Electrical Engineering from recognized institution with 1 years working experience. With experience in using AutoCAD, PCB design, Excel, Word and etc. Fresh graduate is encouraged to apply with own transport.
  SALARY :

RM1800 – 2000

 

POSITION : TECHNICAL Engineer, ELEVATOR (JY)             
COMPANY’S BUSINESS :

Industrial Automations, Information services, Projects, standard electrical products & mfg

PLACE OF WORK :

SUBANG JAYA

  REQUIREMENT : Possess Diploma and Degree in Mechanical/ E&E. To provide the technical service for elevator. Fresh graduates can be considered
SALARY :

RM2000+-

 

POSITION : Project Supervisor / Engineer, ELEVATOR (JY)              
COMPANY’S BUSINESS :

Industrial Automations, Information services, Projects, standard electrical products & mfg

PLACE OF WORK :

SUBANG JAYA

  REQUIREMENT : Possess Diploma and Degree in Mechanical/ E&E/ civil or building engineering. Posses own transport and willing to travel to site daily. Fresh graduates can be considered.
SALARY :

RM2000+-

 

POSITION :

CAD OPERATOR (JY) (Based in KLCC)

COMPANY’S BUSINESS :

Construction and Engineering (Building)

PLACE OF WORK :

JALAN SULTAN ISMAIL, KUALA LUMPUR

  REQUIREMENT : Diploma in any industry with at least 2 years experience in drawing condominium, able to work independently.
SALARY :

RM2500+-

 

POSITION : FIELD OPERATION EXECUTIVE (SK)
COMPANY’S BUSINESS :

Supplier – quality equipment, materials & tools in the retreading,   tyre servicing & automotive sectors

PLACE OF WORK :

P.J.

  REQUIREMENT : Certificate/Diploma/Degree in Engineering or related discipline. At least 2 years related working experience, preferably in a technical capacity. A mechanical background, especially in factory/production/workshop operation would be viewed favorably. Experience in tyre related industries is not necessary but would be an advantage. Training will be provided. Good communications & interpersonal skills. Able to work independently, resourceful and customer service oriented. Possess own transport & willing to travel extensively.
SALARY :

RM 2000 ~ RM 3000

 

  POSITION : CHARGEMAN/SR CHARGEMAN (JY)
  COMPANY’S BUSINESS :

Consultancy  company for energy conservation system

  PLACE OF WORK : KUALA LUMPUR
  REQUIREMENT : Diploma in Electrical Engineering from recognized institution with 3 years working experience, with knowledge and experience in 415V 3-phase equipment installation, test and commission, ability to coordinate with sub-contractors and supervise equipment installation. Good interpersonal skills, computer literate, independent, good leadership and problem solving skills. Possess ability to read and explain electrical schematic diagram and possess A0 or A1 issued by approved body. Possess own transport.
  SALARY :

RM1500 - 3000

 

  POSITION : ASSISTANT PROJECT MANAGER-ELECTRICAL (JY)          
  COMPANY’S BUSINESS :

Consultancy  company for energy conservation system

  PLACE OF WORK : KUALA LUMPUR
  REQUIREMENT : Degree in Electrical and Electronic Engineering with 5 years working experience, with chargeman certificate-A0 or A1 and AutoCAD, PCB design knowledge will be added advantage, experience in 415V 3-phase equipment installation, test and commission, technically sound, able to lead and manage a team of engineers and chargeman, ability to coordinate with sub-contractors and implement projects and meet deadlines, good interpersonal skills, computer literate, independent, good leadership and problem solving skills, with own transport.
  SALARY :

RM4000 - 5000

                                                                               

Copyright © 2003  ::  Agensi Pekerjaan Bon Sdn Bhd, Malaysia  ::